Cottbuser Halde wind farm is located in Brandenburg, Germany. It was completed in 2009 and is owned by EPURON.
It is near .
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or higher.
A perfect position for a project like Cottbuser Halde could have a near constant flow of non-turbulent wind all year long, with a minimum likelihood of abrupt powerful bursts of wind. An important factor of turbine siting is moreover admittance to local demand or transmission capa.
During the planning stages the Cottbuser Halde wind farm would have been checked and authenticated through wind measurements. Meteorological wind data alone is usually not enough for accurate siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been imperative to determining site potential to be able to fund the project. Local winds are frequently monitored for a year or more, and detailed wind maps constructed before wind generators are set up.
Altitude would also possess a part to playwithin a project like Cottbuser Halde. This is due to drag The rise in velocity with altitude is most remarkable near the surface and is impacted by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and is more pronounced near land and is altered by topography, surface and obstacles.
Almost always, the growth of wind speeds with escalating height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, raises the predicted wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out in order that they don’t affect each other. However this isn’t necessarily the case in hilly areas.
Individual turbines at Cottbuser Halde are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is enhanced in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and perhaps roads to each and every turbine site.
Facts about Cottbuser Halde wind farm
- Name: Cottbuser Halde
- Wind turbine Supplier: Made Tecnolgías, Model: AE46, Units: 35,
- Country: Germany
- State: Brandenburg
- Owner: EPURON