Conneforde wind farm is situated in Lower Saxony, Germany. It was completed in 2000 and is owned by Enercon.
It is near Conneforde.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or more.
The very best location for something such as Conneforde would be a steady supply of non-turbulent wind. An important factor of turbine siting is furthermore access to local demand or transmission capaConneforde.
Before building, Conneforde was probably screened on the basis of a wind atlas, and validated with wind specifications. However, Conneforde wind farm might have needed more than merely meteorological data and measurements.
Assortment of site-specific data for wind speed and direction would have been crucial to determining site potential in order to fund the project. Local winds are often checked for a year or more, and comprehensive wind maps made before wind generators are set up.
Altitude would also have a part to playwithin a project like Conneforde. This is because of drag The boost in velocity with altitude is most remarkable close to the surface and is impacted by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and it is more distinct near land and is transformed by topography, surface and obstructions.
Wind speeds escalating with altitude is part of a wind energy law. This Lower Saxonys wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, boosts the expected wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they don’t affect each other. But micrositing maximizes placement, particularly in hilly areas.
Individual turbines at Conneforde are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is increased in voltage using a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and possibly access roads to each turbine site.
Facts about Conneforde wind farm
- Name: Conneforde
- Wind turbine Supplier: Siemens, Model: SWT-2.3-101, Units: 9,
- Country: Germany
- Developer: Enercon
- State: Lower Saxony
- City: Conneforde
- Owner: Enercon