Chemnitz wind project was installed in Thuringia, Germany It was completed in 2001 and is owned by .
It is near Chemnitz.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or higher.
A great position for a project like Chemnitz might have a near constant flow of non-turbulent wind all year round, with a minimum chances of sudden effective bursts of wind. An important factor of turbine siting is furthermore admittance to local demand or transmission capaChemnitz.
During the planning stages the Chemnitz wind farm would have been checked and endorsed through wind measurements. However, Chemnitz wind farm might have needed more than simply meteorological data and measurements.
Site data around Chemnitz is a major aspect in the ‘development’ decision Winds around Chemnitz are examined for at least a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
The wind hits swifter at higher altitudes as a result of reduced influence of drag. The increase in velocity with altitude is most extraordinary at the surface and is impacted by landscape, surface roughness, and upwind hurdles such as trees or buildings. Velocity grows with altitude and is also more pronounced near land and is transformed by geography, surface and hurdles.
Generally, the rise of wind speeds with escalating height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, enhances the expected wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out to make sure they don’t affect each other. But this might not be the case in hilly areas.
Individual turbines at Chemnitz are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric energy is improved in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and probably access roads to each turbine site.
Facts about Chemnitz wind farm
- Name: Chemnitz
- Wind turbine Supplier: Enercon, Model: E82_2000kW, Units: 8,
- Country: Germany
- Developer: wpd
- State: Thuringia
- City: Chemnitz