Bütow wind farm is situated in Mecklenburg-Vorpommern, Germany. It was finished in 1999 and is owned by .
It is near Bütow-Zepkow.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or higher.
An ideal destination for a project like Bütow would have a near constant flow of non-turbulent wind throughout the year, having a minimum probability of abrupt potent bursts of wind. Additionally, you wouldn’t get a turbine like associated if Bütow was not built near local demand or transmission capaBütow-Zepkow.
Before development, Bütow was almost certainly screened on the foundation of a wind atlas, and validated with wind measurements. However, Bütow wind farm might have needed more than merely meteorological data and measurements.
Collection of site-specific data for wind speed and direction could have been essential to determining site potential in order to finance the project. Local winds are frequently checked for a year or more, and comprehensive wind maps built before wind generators are set up.
The wind blows more rapidly at greater altitudes as a result of reduced influence of drag. The increase in velocity with altitude is most dramatic at the surface and is affected by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity grows with altitude and it is more distinct near land and is transformed by landscape, surface and limitations.
Wind speeds growing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Increasing the height of a turbine, then, boosts the expected wind speeds by 10%, and the anticipated power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. However this isn’t necessarily the way it is in hilly areas.
Bütow turbines are connected via medium voltage lines and communications.
At a substation, that medium-voltage electric current is elevated in voltage using a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Bütow wind farm
- Name: Bütow
- Wind turbine Supplier: Siemens, Model: SWT-3.6-120 , Units: 80,
- Country: Germany
- Developer: ENERTRAG
- State: Mecklenburg-Vorpommern
- City: Bütow-Zepkow