Burkau wind farm is located in Saxony, Germany. It was in fact brought online in 2009 and is owned by .
It is near Burkau.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or more.
An ideal destination for a project like Burkau would have a near constant flow of non-turbulent wind all year long, with a minimum likelihood of abrupt potent bursts of wind. An important factor of turbine siting is furthermore admission to local demand or transmission capaBurkau.
During the planning stages the Burkau wind farm would have been checked and endorsed through wind measurements. Meteorological wind data alone is usually not adequate for precise siting of a large wind power project.
Site data around Burkau is a major element in the development conclusion Local winds are often watched for a year or more, and detailed wind maps created before wind generators are installed.
The wind blows speedier at greater altitudes due to the reduced effect of drag. The surge in velocity with altitude is most remarkable near the surface and is affected by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity rises with altitude and it is more pronounced near land and is changed by topography, surface and hurdles.
Usually, the increase of wind speeds with escalating height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, enhances the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they don’t affect each other. But micrositing maximizes placement, particularly in hilly areas.
Individual turbines at Burkau are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric energy is enhanced in voltage using a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and possibly roads to each turbine site.
Facts about Burkau wind farm
- Name: Burkau
- Wind turbine Supplier: Gamesa, Model: G52 0.85MW, Units: 94,
- Country: Germany
- Developer: Notus Energy
- State: Saxony
- City: Burkau