Bückwitz wind project was installed in Brandenburg, Germany It was brought online in 2002 and is owned by Global Wind Power A/S.
It is near Bückwitz.
See below for data.
Generally speaking, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or bigger.
The best location for something similar to Bückwitz is a steady supply of non-turbulent wind. Additionally, you would not get a turbine Global Wind Power A/S like Global Wind Power A/S included if Bückwitz was not built near local demand or transmission capaBückwitz.
Before development, Bückwitz was probably screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not adequate for accurate siting of a large wind power project.
Site information around Bückwitz is a major factor in the ‘development’ decision Winds around Bückwitz are evaluated for over a year or so plus the development of detailed maps. Only then are wind turbines installed.
The wind hits more quickly at higher altitudes as a result of reduced effect of drag. The increase in velocity with altitude is most dramatic near the surface and is affected by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and it is more pronounced near land and is transformed by terrain, surface and limitations.
Usually, the growth of wind speeds with escalating elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, increases the anticipated wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out to make sure they don’t affect each other. But micrositing optimizes placement, specially in hilly areas.
Bückwitz turbines are related via medium voltage lines and communications.
At a substation, that medium-voltage electric energy is elevated in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and possibly access roads to each turbine site.