Buchholz i.d.N. wind project was set up in Lower Saxony, Germany It was completed in 2009 and is owned by EnBW (Energie Baden-Württemberg).
It is near Buchholz in der Nordheide.
See below for data.
Typically, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or greater.
A perfect location for a project like Buchholz i.d.N. would have a near constant flow of non-turbulent wind all year round, with a minimum likelihood of sudden potent bursts of wind. Additionally, you wouldn’t get a turbine EnBW (Energie Baden-Württemberg) like EnBW (Energie Baden-Württemberg) included if Buchholz i.d.N. was not built near local demand or transmission capaBuchholz in der Nordheide.
Before building, Buchholz i.d.N. was most likely screened on the basis of a wind atlas, and validated with wind specifications. However, Buchholz i.d.N. wind farm might have needed more than merely meteorological data and measurements.
Site data around Buchholz in der Nordheide would have been a major element in the development choice Winds around Buchholz in der Nordheide are examined for at least a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to playin a project like Buchholz i.d.N.. This is because of drag The boost in velocity with altitude is most spectacular close to the surface and is affected by geography, surface roughness, and upwind hurdles such as trees or buildings. Velocity increases with altitude and is also more obvious near land and is changed by geography, surface and obstructions.
Ordinarily, the increase of wind speeds with raising elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, enhances the expected wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out in order that they don’t affect each other. But this might not be the way it is in hilly areas.
Buchholz i.d.N. turbines are related via medium voltage lines and communications.
At a substation, this medium-voltage electric current is improved in voltage using a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and perhaps roads to every turbine site.
Facts about Buchholz i.d.N. wind farm
- Name: Buchholz i.d.N.
- Wind turbine Supplier: Nordex, Model: N90_2500kW, Units: 4,
- Country: Germany
- Developer: PNE Wind
- State: Lower Saxony
- City: Buchholz in der Nordheide
- Owner: EnBW (Energie Baden-Württemberg)