Brimingen wind project was set up in Rhineland-Palatinate, Germany It was created in 2011 and is owned by .
It is near Brimingen.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or higher.
The best place for a project like Brimingen would have a near constant flow of non-turbulent wind all year long, having a minimum likelihood of sudden powerful bursts of wind. An important factor of turbine siting is moreover access to local demand or transmission capaBrimingen.
Before building, Brimingen was most likely screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not adequate for precise siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been imperative to determining site potential in order to finance the project. Local winds are frequently checked for a year or more, and detailed wind maps constructed before wind generators are installed.
The wind blows sooner at greater altitudes as a result of reduced effect of drag. The increase in velocity with altitude is most remarkable at the surface and is impacted by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and it is more obvious near land and is changed by topography, surface and hurdles.
Sometimes, the increase of wind speeds with increasing height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, boosts the predicted wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out in order that they don’t affect each other. But this is not always the situation in hilly areas.
Brimingen turbines are related via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric current is enhanced in voltage using a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and perhaps roads to each turbine site.
Facts about Brimingen wind farm
- Name: Brimingen
- Wind turbine Supplier: Vestas Wind Systems, Model: V80/ 2MW, Units: 3,
- Country: Germany
- Developer: wp ingenieurbau
- State: Rhineland-Palatinate
- City: Brimingen