Brieske wind project was set up in Brandenburg, Germany It was in fact brought online in 2005 and is owned by .
It is near Brieske.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or higher.
The best destination for something such as Brieske is a steady supply of non-turbulent wind. An essential aspect of turbine siting is also access to local requirement or transmission capaBrieske.
Before development, Brieske was probably screened on the basis of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not adequate for precise siting of a large wind power project.
Site info around Brieske is a major factor in the development choice Local winds are frequently monitored for a year or more, and detailed wind maps built before wind generators are set up.
The wind hits more rapidly at greater altitudes due to the reduced influence of drag. The boost in velocity with altitude is most extraordinary near the surface and is impacted by landscape, surface roughness, and upwind hurdles such as trees or buildings. Velocity increases with altitude and it is more evident near land and is transformed by topography, surface and obstacles.
Almost always, the increase of wind speeds with escalating height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, raises the anticipated wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out in order that they don’t affect one another. But micrositing optimizes placement, particularly in hilly areas.
Individual turbines at Brieske are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric energy is enhanced in voltage using a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and probably roads to each turbine site.
Facts about Brieske wind farm
- Name: Brieske
- Wind turbine Supplier: Enercon, Model: E40/5.40, Units: 6,
- Country: Germany
- Developer: PNE Wind
- State: Brandenburg
- City: Brieske