Breberen Nord wind project was installed in North Rhine-Westphalia, Germany It was finished in 2004 and is owned by .
It is near Breberen Nord.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or more.
The best position for a project like Breberen Nord might have a near constant flow of non-turbulent wind all year long, with a minimum chance of sudden potent bursts of wind. Additionally, you would not get a turbine like involved if Breberen Nord was not built near local demand or transmission capaBreberen Nord.
During the planning stages the Breberen Nord wind farm would’ve been checked and endorsed through wind measurements. Meteorological wind data alone is usually not adequate for precise siting of a large wind power project.
Assortment of site-specific data for wind speed and direction would have been essential to determining site potential to be able to fund the project. Winds around Breberen Nord are analysed for at least a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
The wind hits faster at greater altitudes as a result of reduced effect of drag. The boost in velocity with altitude is most remarkable close to the surface and is affected by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and is more distinct near land and is transformed by landscape, surface and obstacles.
Wind speeds escalating with altitude is part of a wind energy law. This North Rhine-Westphalias wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, increases the expected wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out in order that they don’t affect each other. However this may not be the situation in hilly areas.
Individual turbines at Breberen Nord are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric current is improved in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and probably roads to each and every turbine site.
Facts about Breberen Nord wind farm
- Name: Breberen Nord
- Wind turbine Supplier: Mitsubishi Corporation, Model: MWT1000-61, Units: 160,
- Country: Germany
- Developer: BMR Windenergie
- State: North Rhine-Westphalia
- City: Breberen Nord