Brandshagen wind farm is situated in Mecklenburg-Vorpommern, Germany. It was created in 2000 and is owned by .
It is near Brandshagen.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The very best destination for something such as Brandshagen is a steady availability of non-turbulent wind. Additionally, you wouldn’t get a turbine like included if Brandshagen was not built near local demand or transmission capaBrandshagen.
Before building, Brandshagen was probably screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not sufficient for correct siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been essential to determining site potential to be able to finance the project. Winds around Brandshagen are analysed for over a year or so plus the development of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to playin a project like Brandshagen. This is due to drag The increase in velocity with altitude is most spectacular close to the surface and is impacted by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity boosts with altitude and it is more pronounced near land and is changed by topography, surface and hurdles.
Wind speeds raising with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the height of a turbine, then, increases the anticipated wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they really don’t affect each other. But this might not be the way it is in hilly areas.
Individual turbines at Brandshagen are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric energy is improved in voltage with a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and probably roads to each turbine site.
Facts about Brandshagen wind farm
- Name: Brandshagen
- Wind turbine Supplier: Enercon, Model: 2MW, Units: 2,
- Country: Germany
- Developer: Enercon
- State: Mecklenburg-Vorpommern
- City: Brandshagen