Börger wind farm is located in Lower Saxony, Germany. It was brought online in 2003 and is owned by ENOVA.
It is near Börger.
See below for data.
Generally speaking, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or more.
The best location for something similar to Börger would be a steady availability of non-turbulent wind. Additionally, you would not get a turbine ENOVA like ENOVA included if Börger was not built near local demand or transmission capaBörger.
Before construction, Börger was most likely screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not adequate for correct siting of a large wind power project.
Assortment of site-specific data for wind speed and direction might have been crucial to determining site potential in order to finance the project. Local winds are often examined for a year or more, and detailed wind maps made before wind generators are set up.
Altitude would also possess a part to performwithin a project like Börger. This is because of drag The boost in velocity with altitude is most extraordinary near the surface and is impacted by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity increases with altitude and it is more pronounced near land and is altered by landscape, surface and obstructions.
Typically, the increase of wind speeds with escalating elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, raises the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they don’t affect one another. But micrositing optimizes placement, particularly in hilly areas.
Individual turbines at Börger are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric current is increased in voltage using a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and perhaps roads to every turbine site.
Facts about Börger wind farm
- Name: Börger
- Wind turbine Supplier: Enercon, Model: E-70/2,
- Country: Germany
- Developer: ENOVA
- State: Lower Saxony
- City: Börger
- Owner: ENOVA