Bliesdorf wind farm is located in Brandenburg, Germany. It was created in 2004 and is owned by .
It is near Bliesdorf.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The very best destination for something similar to Bliesdorf would be a steady supply of non-turbulent wind. An important factor of turbine siting is also admittance to local demand or transmission capaBliesdorf.
Before construction, Bliesdorf was almost certainly screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not ample for accurate siting of a large wind power project.
Assortment of site-specific data for wind speed and direction could have been imperative to determining site potential in order to fund the project. Winds around Bliesdorf are evaluated for at least a year or so plus the creation of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playin a project like Bliesdorf. This is due to drag The increase in velocity with altitude is most spectacular close to the surface and is affected by geography, surface roughness, and upwind hurdles such as trees or buildings. Velocity grows with altitude and is more evident near land and is changed by geography, surface and obstructions.
Usually, the growth of wind speeds with raising height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, boosts the expected wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they really don’t affect each other. But micrositing optimizes placement, particularly in hilly areas.
Bliesdorf turbines are related via medium voltage lines and communications.
At a substation, this medium-voltage electric energy is increased in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and possibly roads to each turbine site.
Facts about Bliesdorf wind farm
- Name: Bliesdorf
- Wind turbine Supplier: Vestas Wind Systems, Model: V90/2000, Units: 3,
- Country: Germany
- Developer: Ventotec
- State: Brandenburg
- City: Bliesdorf