Billertshausen-Zell wind farm is situated in Hesse, Germany. It was brought online in 2003 and is owned by Hessenenergie.
It is near Billertshausen-Zell.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or higher.
A perfect position for a project like Billertshausen-Zell would have a near constant flow of non-turbulent wind all year long, with a minimum chance of abrupt effective bursts of wind. An important factor of turbine siting is furthermore admission to local demand or transmission capaBillertshausen-Zell.
During the planning stages the Billertshausen-Zell wind farm would have been checked and validated through wind measurements. Meteorological wind data alone is usually not sufficient for exact siting of a large wind power project.
Collection of site-specific data for wind speed and direction could have been essential to determining site potential as a way to finance the project. Local winds are frequently monitored for a year or more, and detailed wind maps built before wind generators are installed.
Altitude would also possess a part to playin a project like Billertshausen-Zell. This is because of drag The rise in velocity with altitude is most extraordinary near the surface and is impacted by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity boosts with altitude and is also more distinct near land and is changed by topography, surface and hurdles.
Almost always, the increase of wind speeds with growing height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, boosts the expected wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect each other. But this might not be the situation in hilly areas.
Individual turbines at Billertshausen-Zell are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric energy is improved in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and possibly roads to each and every turbine site.
Facts about Billertshausen-Zell wind farm
- Name: Billertshausen-Zell
- Wind turbine Supplier: XEMC Darwind, Model: 2MW, Units: 24,
- Country: Germany
- State: Hesse
- City: Billertshausen-Zell
- Owner: Hessenenergie