Bietikow wind project was installed in Brandenburg, Germany It was in fact brought online in 2003 and is owned by .
It is near Bietikow.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
A great location for a project like Bietikow would have a near constant flow of non-turbulent wind all year round, with a minimum likelihood of abrupt potent bursts of wind. Additionally, you would not get a turbine like associated if Bietikow was not built near local demand or transmission capaBietikow.
Before building, Bietikow was almost certainly screened on the basis of a wind atlas, and validated with wind specifications. However, Bietikow wind farm would have needed more than merely meteorological data and measurements.
Site information around Bietikow would have been a major aspect in the development decision Winds around Bietikow are evaluated for at least a year or so plus the development of detailed maps. Only then are wind turbines installed.
The wind hits swifter at higher altitudes as a result of reduced effect of drag. The rise in velocity with altitude is most spectacular near the surface and is impacted by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity increases with altitude and is also more distinct near land and is changed by terrain, surface and limitations.
Generally, the growth of wind speeds with raising elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, raises the anticipated wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they don’t affect one another. However this isn’t necessarily the case in hilly areas.
Individual turbines at Bietikow are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is enhanced in voltage using a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and possibly access roads to each and every turbine site.
Facts about Bietikow wind farm
- Name: Bietikow
- Wind turbine Supplier: Vestas Wind Systems, Model: V90/ 2MW, Units: 5,
- Country: Germany
- Developer: Enercon
- State: Brandenburg
- City: Bietikow