Berne wind farm is located in Lower Saxony, Germany. It was in fact brought online in 2015 and is owned by .
It is near Berne.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or higher.
The best destination for something such as Berne is a steady supply of non-turbulent wind. Additionally, you wouldn’t get a turbine like involved if Berne was not built near local demand or transmission capaBerne.
Before development, Berne was probably screened on the basis of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not adequate for precise siting of a large wind power project.
Collection of site-specific data for wind speed and direction could have been important to determining site potential to be able to finance the project. Winds around Berne are analysed for over a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playin a project like Berne. This is because of drag The rise in velocity with altitude is most dramatic at the surface and is impacted by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and is also more pronounced near land and is altered by terrain, surface and obstructions.
Generally, the rise of wind speeds with escalating elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, boosts the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out in order that they don’t affect one another. But this isn’t necessarily the situation in hilly areas.
Berne turbines are related via medium voltage lines and communications.
At a substation, that medium-voltage electric current is increased in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and possibly access roads to each and every turbine site.
Facts about Berne wind farm
- Name: Berne
- Wind turbine Supplier: Senvion, Model: MD77_1500kW, Units: 8,
- Country: Germany
- State: Lower Saxony
- City: Berne