Bergheim wind project was installed in North Rhine-Westphalia, Germany It was created in 2005 and is owned by EnergieKontor.
It is near Bergheim.
See below for data.
As a rule, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or higher.
The best destination for something like Bergheim would be a steady supply of non-turbulent wind. Additionally, you would not get a turbine EnergieKontor like EnergieKontor associated if Bergheim was not built near local demand or transmission capaBergheim.
Before building, Bergheim was most likely screened on the basis of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not enough for correct siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been important to determining site potential as a way to finance the project. Winds around Bergheim are analysed for over a year or so plus the development of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to performwithin a project like Bergheim. This is due to drag The surge in velocity with altitude is most dramatic near the surface and is impacted by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and it is more evident near land and is transformed by landscape, surface and obstructions.
Wind speeds growing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, raises the anticipated wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out to make sure they don’t affect one another. But micrositing optimizes placement, specifically in hilly areas.
Individual turbines at Bergheim are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is improved in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and probably roads to each turbine site.
Facts about Bergheim wind farm
- Name: Bergheim
- Wind turbine Supplier: Bonus, Model: B62/1300 , Units: 5,
- Country: Germany
- Developer: EnergieKontor
- State: North Rhine-Westphalia
- City: Bergheim
- Owner: EnergieKontor