Berge-Lietzow-Nauen wind project was installed in Brandenburg, Germany It was created in 2005 and is owned by .
It is near .
See below for data.
Generally speaking, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or more.
A great location for a project like Berge-Lietzow-Nauen might have a near constant flow of non-turbulent wind year round, with a minimum chance of abrupt effective bursts of wind. Additionally, you wouldn’t get a turbine like associated if Berge-Lietzow-Nauen was not built near local demand or transmission capa.
Before construction, Berge-Lietzow-Nauen was probably screened on the basis of a wind atlas, and validated with wind measurements. However, Berge-Lietzow-Nauen wind farm might have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction could have been imperative to determining site potential as a way to fund the project. Local winds are often supervised for a year or more, and comprehensive wind maps created before wind generators are set up.
The wind hits more rapidly at greater altitudes because of the reduced effect of drag. The rise in velocity with altitude is most spectacular close to the surface and is affected by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and is also more evident near land and is altered by landscape, surface and limitations.
Wind speeds increasing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Increasing the elevation of a turbine, then, enhances the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out to make sure they don’t affect one another. But micrositing maximizes placement, specially in hilly areas.
Berge-Lietzow-Nauen turbines are related via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric current is increased in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and perhaps access roads to each turbine site.
Facts about Berge-Lietzow-Nauen wind farm
- Name: Berge-Lietzow-Nauen
- Wind turbine Supplier: Nordex, Model: N90/2500 , Units: 36,
- Country: Germany
- Developer: wpd
- State: Brandenburg