Benndorf wind project was installed in Saxony-Anhalt, Germany It was brought online in 2001 and is owned by Wind7.
It is near Benndorf.
See below for data.
Typically, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or bigger.
The very best location for something like Benndorf would be a steady supply of non-turbulent wind. Additionally, you would not get a turbine Wind7 like Wind7 included if Benndorf was not built near local demand or transmission capaBenndorf.
During the planning stages the Benndorf wind farm would’ve been checked and authenticated through wind measurements. However, Benndorf wind farm might have needed more than simply meteorological data and measurements.
Site data around Benndorf would have been a major element in the ‘development’ decision Local winds are often examined for a year or more, and detailed wind maps made before wind generators are installed.
The wind hits quicker at greater altitudes because of the reduced influence of drag. The boost in velocity with altitude is most extraordinary near the surface and is impacted by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity grows with altitude and it is more obvious near land and is changed by geography, surface and obstructions.
Sometimes, the rise of wind speeds with escalating elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, raises the anticipated wind speeds by 10%, and the estimated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But micrositing maximizes placement, specially in hilly areas.
Benndorf turbines are linked via medium voltage lines and communications.
At a substation, this medium-voltage electric energy is elevated in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and probably roads to each and every turbine site.
Facts about Benndorf wind farm
- Name: Benndorf
- Wind turbine Supplier: Enercon, Model: E-82 / 2300 kW, Units: 17,
- Country: Germany
- State: Saxony-Anhalt
- City: Benndorf
- Owner: Wind7