Bellum wind farm is located in Lower Saxony, Germany. It was completed in 2004 and is owned by .
It is near Bellum.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or more.
An ideal position for a project like Bellum could have a near constant flow of non-turbulent wind throughout the year, with a minimum chances of sudden effective bursts of wind. Additionally, you wouldn’t get a turbine like included if Bellum was not built near local demand or transmission capaBellum.
Before development, Bellum was probably screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not ample for exact siting of a large wind power project.
Collection of site-specific data for wind speed and direction might have been essential to determining site potential in order to fund the project. Winds around Bellum are analysed for at least a year or so plus the creation of detailed maps. Only then are wind turbines installed.
The wind blows swifter at higher altitudes because of the reduced influence of drag. The boost in velocity with altitude is most dramatic at the surface and is impacted by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and is also more obvious near land and is transformed by terrain, surface and limitations.
Wind speeds increasing with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Increasing the elevation of a turbine, then, increases the anticipated wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they don’t affect one another. But micrositing increases placement, specially in hilly areas.
Bellum turbines are related via medium voltage lines and communications.
At a substation, that medium-voltage electric current is elevated in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to every turbine site.