Beggerow-Borrentin wind project was installed in Mecklenburg-Vorpommern, Germany It was finished in 2013 and is owned by .
It is near Beggerow-Borenthin.
See below for data.
As a general rule, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or more.
A perfect position for a project like Beggerow-Borrentin would have a near constant flow of non-turbulent wind all year round, with a minimum probability of sudden effective bursts of wind. Additionally, you would not get a turbine like associated if Beggerow-Borrentin was not built near local demand or transmission capaBeggerow-Borenthin.
During the planning stages the Beggerow-Borrentin wind farm would’ve been checked and authenticated through wind measurements. However, Beggerow-Borrentin wind farm might have needed more than merely meteorological data and measurements.
Site info around Beggerow-Borenthin is a major factor in the development final decision Winds around Beggerow-Borenthin are examined for over a year or so plus the development of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to performin a project like Beggerow-Borrentin. This is because of drag The surge in velocity with altitude is most remarkable at the surface and is impacted by landscape, surface roughness, and upwind obstructions such as trees or buildings. Velocity increases with altitude and is also more pronounced near land and is altered by topography, surface and hurdles.
Sometimes, the growth of wind speeds with escalating elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, increases the predicted wind speeds by 10%, and the expected power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But micrositing maximizes placement, particularly in hilly areas.
Beggerow-Borrentin turbines are related via medium voltage lines and communications.
At a substation, it medium-voltage electric energy is enhanced in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and probably access roads to every turbine site.
Facts about Beggerow-Borrentin wind farm
- Name: Beggerow-Borrentin
- Wind turbine Supplier: Vestas Wind Systems, Model: V80/2MW, Units: 9,
- Country: Germany
- Developer: wpd
- State: Mecklenburg-Vorpommern
- City: Beggerow-Borenthin