Bedburg wind farm is situated in North Rhine-Westphalia, Germany. It was finished in 2006 and is owned by .
It is near Bedburg.
See below for data.
For the most part, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or greater.
An ideal position for a project like Bedburg could have a near constant flow of non-turbulent wind all year round, with a minimum chance of abrupt potent bursts of wind. An essential aspect of turbine siting is also admission to local demand or transmission capaBedburg.
During the planning stages the Bedburg wind farm would’ve been checked and endorsed through wind measurements. Meteorological wind data alone is usually not sufficient for exact siting of a large wind power project.
Assortment of site-specific data for wind speed and direction might have been vital to determining site potential in order to finance the project. Local winds are frequently examined for a year or more, and comprehensive wind maps made before wind generators are set up.
The wind hits faster at higher altitudes as a result of reduced influence of drag. The surge in velocity with altitude is most spectacular at the surface and is impacted by geography, surface roughness, and upwind hurdles such as trees or buildings. Velocity rises with altitude and it is more evident near land and is altered by topography, surface and limitations.
Sometimes, the growth of wind speeds with escalating height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, increases the predicted wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect each other. But micrositing increases placement, specially in hilly areas.
Bedburg turbines are related via medium voltage lines and communications.
At a substation, that medium-voltage electric energy is elevated in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and probably access roads to each and every turbine site.
Facts about Bedburg wind farm
- Name: Bedburg
- Wind turbine Supplier: Enercon, Model: E-70/2300, Units: 2,
- Country: Germany
- Developer: ABO Wind
- State: North Rhine-Westphalia
- City: Bedburg