Bärenholz wind project was set up in Bavaria, Germany It was completed in 2012 and is owned by Ostwind group.
It is near Bärenholz.
See below for data.
Generally speaking, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or bigger.
The very best location for something similar to Bärenholz would be a steady availability of non-turbulent wind. An essential aspect of turbine siting is moreover admittance to local requirement or transmission capaBärenholz.
Before construction, Bärenholz was almost certainly screened on the basis of a wind atlas, and validated with wind measurements. However, Bärenholz wind farm would have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction might have been vital to determining site potential in order to finance the project. Winds around Bärenholz are analysed for at least a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to playin a project like Bärenholz. This is because of drag The boost in velocity with altitude is most extraordinary near the surface and is affected by landscape, surface roughness, and upwind hurdles such as trees or buildings. Velocity rises with altitude and it is more pronounced near land and is changed by terrain, surface and obstacles.
Wind speeds growing with altitude is part of a wind energy law. This forecasts wind speed rises with the 7th root of altitude. Doubling the altitude of a turbine, then, raises the anticipated wind speeds by 10%, and the expected power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But micrositing increases placement, particularly in hilly areas.
Bärenholz turbines are related via medium voltage lines and communications.
At a substation, that medium-voltage electric current is enhanced in voltage using a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and possibly roads to every turbine site.
Facts about Bärenholz wind farm
- Name: Bärenholz
- Wind turbine Supplier: Vestas Wind Systems, Model: V90/ 2MW, Units: 25,
- Country: Germany
- Developer: Ostwind group
- State: Bavaria
- City: Bärenholz
- Owner: Ostwind group