Aschersleben – Nauen wind project was installed in Saxony-Anhalt, Germany It was created in 2003 and is owned by .
It is near Aschersleben – Nauen.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or higher.
A perfect location for a project like Aschersleben – Nauen could have a near constant flow of non-turbulent wind all year round, having a minimum chances of abrupt powerful bursts of wind. Additionally, you wouldn’t get a turbine like involved if Aschersleben – Nauen was not built near local demand or transmission capaAschersleben – Nauen.
During the planning stages the Aschersleben – Nauen wind farm would have been checked and confirmed through wind measurements. However, Aschersleben – Nauen wind farm would have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction might have been crucial to determining site potential in order to finance the project. Winds around Aschersleben – Nauen are evaluated for at least a year or so plus the development of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to performwithin a project like Aschersleben – Nauen. This is because of drag The rise in velocity with altitude is most spectacular near the surface and is affected by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity grows with altitude and is also more evident near land and is changed by terrain, surface and limitations.
Normally, the growth of wind speeds with increasing elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, boosts the anticipated wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out in order that they don’t affect each other. However this might not be the way it is in hilly areas.
Individual turbines at Aschersleben – Nauen are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is elevated in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and probably access roads to each turbine site.
Facts about Aschersleben – Nauen wind farm
- Name: Aschersleben – Nauen
- Wind turbine Supplier: Neg Micon, Model: NM72c/1500, Units: 5,
- Country: Germany
- Developer: wpd
- State: Saxony-Anhalt
- City: Aschersleben – Nauen