Altheimer-Höhe II wind project was installed in Baden-Württemberg, Germany It was brought online in 2011 and is owned by Windpark Altheimer Höhe GmbH & Co. KG.
It is near Altheim.
See below for data.
For the most part, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or larger.
A great location for a project like Altheimer-Höhe II could have a near constant flow of non-turbulent wind year round, with a minimum chance of sudden potent bursts of wind. Additionally, you wouldn’t get a turbine Windpark Altheimer Höhe GmbH & Co. KG like Windpark Altheimer Höhe GmbH & Co. KG included if Altheimer-Höhe II was not built near local demand or transmission capaAltheim.
Before development, Altheimer-Höhe II was probably screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not ample for precise siting of a large wind power project.
Site data around Altheim is a major factor in the ‘development’ decision Winds around Altheim are examined for at least a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to performwithin a project like Altheimer-Höhe II. This is because of drag The surge in velocity with altitude is most extraordinary at the surface and is affected by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity boosts with altitude and is more evident near land and is transformed by topography, surface and obstacles.
Sometimes, the rise of wind speeds with escalating elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, raises the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out to make sure they don’t affect each other. But micrositing optimizes placement, particularly in hilly areas.
Altheimer-Höhe II turbines are related via medium voltage lines and communications.
At a substation, this particular medium-voltage electric energy is increased in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and probably access roads to each and every turbine site.
Facts about Altheimer-Höhe II wind farm
- Name: Altheimer-Höhe II
- Wind turbine Supplier: Senvion, Model: MM92/2MW, Units: 2,
- Country: Germany
- State: Baden-Württemberg
- City: Altheim
- Owner: Windpark Altheimer Höhe GmbH & Co. KG