Deux Rivières wind farm is situated in Lorraine, France. It was in fact brought online in 2011 and is owned by .
It is near Tellancourt, Saint-Pancré, Doncourt, Beuveille; in Meurthe-et-Moselle department.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or higher.
The best location for something such as Deux Rivières is a steady availability of non-turbulent wind. Additionally, you would not get a turbine like associated if Deux Rivières was not built near local demand or transmission capaTellancourt, Saint-Pancré, Doncourt, Beuveille; in Meurthe-et-Moselle department.
Before building, Deux Rivières was probably screened on the foundation of a wind atlas, and validated with wind measurements. However, Deux Rivières wind farm would have needed more than just meteorological data and measurements.
Site info around Tellancourt, Saint-Pancré, Doncourt, Beuveille; in Meurthe-et-Moselle department is a major aspect in the ‘development’ conclusion Winds around Tellancourt, Saint-Pancré, Doncourt, Beuveille; in Meurthe-et-Moselle department are examined for over a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to playin a project like Deux Rivières. This is because of drag The rise in velocity with altitude is most dramatic close to the surface and is affected by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and it is more evident near land and is altered by landscape, surface and obstacles.
Wind speeds raising with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the height of a turbine, then, boosts the anticipated wind speeds by 10%, and the anticipated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But this is not always the situation in hilly areas.
Individual turbines at Deux Rivières are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric energy is increased in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Deux Rivières wind farm
- Name: Deux Rivières
- Wind turbine Supplier: Senvion, Model: MM92/2050, Units: 2,
- Country: France
- Developer: Ostwind group
- State: Lorraine
- City: Tellancourt, Saint-Pancré, Doncourt, Beuveille; in Meurthe-et-Moselle department