Cruas wind project was set up in Rhône-Alpes, France It was in fact brought online in 2008 and is owned by .
It is near .
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or higher.
The very best location for something like Cruas is a steady supply of non-turbulent wind. An essential aspect of turbine siting is furthermore access to local demand or transmission capa.
During the planning stages the Cruas wind farm would’ve been checked and validated through wind measurements. Meteorological wind data alone is usually not adequate for correct siting of a large wind power project.
Site data around is a major aspect in the development conclusion Winds around are analysed for over a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
The wind hits speedier at higher altitudes because of the reduced effect of drag. The rise in velocity with altitude is most extraordinary at the surface and is affected by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and it is more evident near land and is changed by geography, surface and limitations.
Wind speeds escalating with altitude is part of a wind energy law. This Rhône-Alpess wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, boosts the predicted wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out to make sure they don’t affect one another. But micrositing increases placement, specifically in hilly areas.
Individual turbines at Cruas are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is elevated in voltage using a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to each turbine site.
Facts about Cruas wind farm
- Name: Cruas
- Wind turbine Supplier: Suzlon Energy, Model: S88/2100, Units: 10,
- Country: France
- Developer: EDF Energy
- State: Rhône-Alpes