Côte du pommier wind project was set up in Champagne-Ardenne, France It was completed in 2012 and is owned by .
It is near Mergey, Chapelle Vallon.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The best location for something such as Côte du pommier would be a steady availability of non-turbulent wind. An essential aspect of turbine siting is furthermore admittance to local demand or transmission capaMergey, Chapelle Vallon.
Before construction, Côte du pommier was most likely screened on the foundation of a wind atlas, and validated with wind measurements. However, Côte du pommier wind farm might have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction could have been imperative to determining site potential in order to finance the project. Local winds are frequently examined for a year or more, and comprehensive wind maps constructed before wind generators are installed.
The wind hits swifter at greater altitudes due to the reduced influence of drag. The rise in velocity with altitude is most dramatic at the surface and is impacted by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity boosts with altitude and it is more distinct near land and is transformed by landscape, surface and obstacles.
Wind speeds escalating with altitude is part of a wind energy law. This Champagne-Ardennes wind speed rises with the 7th root of altitude. Doubling the height of a turbine, then, increases the predicted wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect each other. But micrositing optimizes placement, specially in hilly areas.
Individual turbines at Côte du pommier are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric current is elevated in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and possibly roads to every turbine site.
Facts about Côte du pommier wind farm
- Name: Côte du pommier
- Wind turbine Supplier: Vestas Wind Systems, Model: Vestas Multipower 52, Units: 40,
- Country: France
- Developer: NEOEN
- State: Champagne-Ardenne
- City: Mergey, Chapelle Vallon