Corroy wind project was installed in Champagne-Ardenne, France It was in fact brought online in 2011 and is owned by .
It is near Corroy.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
The very best destination for something such as Corroy would be a steady availability of non-turbulent wind. Additionally, you wouldn’t get a turbine like involved if Corroy was not built near local demand or transmission capaCorroy.
Before construction, Corroy was almost certainly screened on the basis of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not sufficient for accurate siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been imperative to determining site potential in order to finance the project. Local winds are frequently examined for a year or more, and comprehensive wind maps created before wind generators are set up.
Altitude would also have a part to playwithin a project like Corroy. This is because of drag The increase in velocity with altitude is most extraordinary near the surface and is impacted by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity grows with altitude and it is more pronounced near land and is altered by landscape, surface and limitations.
Generally, the increase of wind speeds with growing elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, raises the anticipated wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they really don’t affect one another. But micrositing maximizes placement, specifically in hilly areas.
Individual turbines at Corroy are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric current is increased in voltage with a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Corroy wind farm
- Name: Corroy
- Wind turbine Supplier: Alstom, Model: ECO122-2.7MW, Units: 10,
- Country: France
- Developer: Valorem
- State: Champagne-Ardenne
- City: Corroy