Corbières Méditerranée wind project was installed in Languedoc-Roussillon, France It was created in 2010 and is owned by .
It is near Aude.
See below for data.
Typically, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or greater.
The best location for something such as Corbières Méditerranée would be a steady supply of non-turbulent wind. An essential aspect of turbine siting is furthermore admission to local demand or transmission capaAude.
Before development, Corbières Méditerranée was probably screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not adequate for precise siting of a large wind power project.
Site data around Aude would have been a major aspect in the ‘development’ final decision Local winds are frequently supervised for a year or more, and detailed wind maps constructed before wind generators are installed.
Altitude would also possess a part to playin a project like Corbières Méditerranée. This is because of drag The rise in velocity with altitude is most spectacular close to the surface and is affected by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and is also more obvious near land and is transformed by terrain, surface and hurdles.
Usually, the increase of wind speeds with increasing elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, increases the predicted wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they don’t affect each other. But this is not always the case in hilly areas.
Corbières Méditerranée turbines are linked via medium voltage lines and communications.
At a substation, this medium-voltage electric current is improved in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Corbières Méditerranée wind farm
- Name: Corbières Méditerranée
- Wind turbine Supplier: Vestas Wind Systems, Model: V90-3MW, Units: 34,
- Country: France
- Developer: EDF Energy
- State: Languedoc-Roussillon
- City: Aude