Conteville wind project was set up in Basse-Normandie, France It was in fact brought online in 2009 and is owned by .
It is near .
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
The best destination for something like Conteville is a steady availability of non-turbulent wind. An important factor of turbine siting is moreover access to local requirement or transmission capa.
During the planning stages the Conteville wind farm would’ve been checked and endorsed through wind measurements. However, Conteville wind farm might have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction would have been vital to determining site potential in order to fund the project. Local winds are frequently checked for a year or more, and detailed wind maps constructed before wind generators are installed.
The wind hits faster at greater altitudes due to the reduced influence of drag. The increase in velocity with altitude is most spectacular close to the surface and is impacted by landscape, surface roughness, and upwind obstructions such as trees or buildings. Velocity grows with altitude and is more obvious near land and is transformed by geography, surface and obstacles.
Wind speeds raising with altitude is part of a wind energy law. This forecasts wind speed rises with the 7th root of altitude. Doubling the altitude of a turbine, then, increases the expected wind speeds by 10%, and the expected power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But micrositing increases placement, specifically in hilly areas.
Conteville turbines are linked via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric current is enhanced in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and possibly roads to every turbine site.
Facts about Conteville wind farm
- Name: Conteville
- Wind turbine Supplier: Enercon, Model: E-44 / 600 kW, Units: 3,
- Country: France
- Developer: Eolia Renovables
- State: Basse-Normandie