Conques wind farm is situated in Languedoc-Roussillon, France. It was brought online in 2005 and is owned by .
It is near .
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
The very best location for something such as Conques would be a steady availability of non-turbulent wind. Additionally, you would not get a turbine like included if Conques was not built near local demand or transmission capa.
During the planning stages the Conques wind farm would have been checked and endorsed through wind measurements. However, Conques wind farm might have needed more than simply meteorological data and measurements.
Site information around would have been a major aspect in the development final decision Winds around are examined for over a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
The wind hits more quickly at higher altitudes due to the reduced effect of drag. The increase in velocity with altitude is most remarkable close to the surface and is impacted by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity grows with altitude and is also more pronounced near land and is altered by geography, surface and hurdles.
Generally, the increase of wind speeds with growing height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, raises the anticipated wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out in order that they don’t affect each other. But micrositing increases placement, specially in hilly areas.
Individual turbines at Conques are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric energy is enhanced in voltage using a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and possibly access roads to every turbine site.
Facts about Conques wind farm
- Name: Conques
- Wind turbine Supplier: Enercon, Model: E70/2300, Units: 4,
- Country: France
- Developer: EDF Energies Nouvelles
- State: Languedoc-Roussillon