Chanteraine wind project was set up in Lorraine, France It was finished in 2008 and is owned by .
It is near Chanteraine.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
The best destination for something such as Chanteraine would be a steady supply of non-turbulent wind. Additionally, you would not get a turbine like associated if Chanteraine was not built near local demand or transmission capaChanteraine.
Before development, Chanteraine was most likely screened on the foundation of a wind atlas, and validated with wind specifications. However, Chanteraine wind farm might have needed more than merely meteorological data and measurements.
Assortment of site-specific data for wind speed and direction could have been important to determining site potential to be able to finance the project. Winds around Chanteraine are examined for over a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
The wind blows more rapidly at higher altitudes due to the reduced effect of drag. The boost in velocity with altitude is most spectacular close to the surface and is affected by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity grows with altitude and is also more pronounced near land and is changed by terrain, surface and obstacles.
Wind speeds increasing with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, raises the expected wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect each other. But micrositing maximizes placement, specially in hilly areas.
Chanteraine turbines are linked via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric current is improved in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and probably access roads to every turbine site.