Centernach wind farm is located in Languedoc-Roussillon, France. It was completed in 2005 and is owned by .
It is near .
See below for data.
Typically, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or greater.
An ideal position for a project like Centernach would have a near constant flow of non-turbulent wind throughout the year, having a minimum probability of sudden powerful bursts of wind. An important factor of turbine siting is furthermore access to local requirement or transmission capa.
During the planning stages the Centernach wind farm would’ve been checked and authenticated through wind measurements. Meteorological wind data alone is usually not sufficient for precise siting of a large wind power project.
Collection of site-specific data for wind speed and direction could have been crucial to determining site potential in order to finance the project. Local winds are often watched for a year or more, and comprehensive wind maps made before wind generators are set up.
Altitude would also possess a part to performin a project like Centernach. This is due to drag The surge in velocity with altitude is most extraordinary at the surface and is impacted by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity grows with altitude and is more evident near land and is changed by topography, surface and obstacles.
Almost always, the increase of wind speeds with escalating elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, raises the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they really don’t affect one another. But micrositing increases placement, specially in hilly areas.
Individual turbines at Centernach are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric current is enhanced in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and perhaps roads to each turbine site.
Facts about Centernach wind farm
- Name: Centernach
- Wind turbine Supplier: Vestas Wind Systems, Model: V52/850, Units: 18,
- Country: France
- Developer: Groupe Valeco
- State: Languedoc-Roussillon