Campigny 1 wind farm is situated in Haute-Normandie, France. It was created in 2011 and is owned by DIF.
It is near Campigny.
See below for data.
As a rule, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or larger.
The best destination for something like Campigny 1 is a steady supply of non-turbulent wind. An essential aspect of turbine siting is furthermore access to local requirement or transmission capaCampigny.
Before building, Campigny 1 was almost certainly screened on the basis of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not sufficient for exact siting of a large wind power project.
Site data around Campigny is a major factor in the development final decision Local winds are often checked for a year or more, and detailed wind maps created before wind generators are installed.
Altitude would also have a part to performin a project like Campigny 1. This is due to drag The boost in velocity with altitude is most spectacular at the surface and is impacted by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and is also more evident near land and is transformed by landscape, surface and obstacles.
Generally, the increase of wind speeds with raising elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, raises the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out to make sure they don’t affect one another. But micrositing optimizes placement, specifically in hilly areas.
Individual turbines at Campigny 1 are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric current is enhanced in voltage with a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and perhaps roads to each turbine site.
Facts about Campigny 1 wind farm
- Name: Campigny 1
- Wind turbine Supplier: General Electric, Model: GE1.5sle, Units: 66,
- Country: France
- Developer: e.n.o. energy
- State: Haute-Normandie
- City: Campigny
- Owner: DIF