Bougainville wind project was set up in Picardie, France It was finished in 2005 and is owned by .
It is near .
See below for data.
Typically, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or more.
An ideal destination for a project like Bougainville would have a near constant flow of non-turbulent wind year round, with a minimum chance of sudden effective bursts of wind. Additionally, you wouldn’t get a turbine like included if Bougainville was not built near local demand or transmission capa.
During the planning stages the Bougainville wind farm would’ve been checked and endorsed through wind measurements. Meteorological wind data alone is usually not enough for exact siting of a large wind power project.
Site info around would have been a major factor in the ‘development’ choice Local winds are often supervised for a year or more, and comprehensive wind maps built before wind generators are set up.
Altitude would also possess a part to performin a project like Bougainville. This is because of drag The boost in velocity with altitude is most extraordinary at the surface and is impacted by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity boosts with altitude and is also more obvious near land and is transformed by terrain, surface and hurdles.
Generally, the increase of wind speeds with growing elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, enhances the expected wind speeds by 10%, and the anticipated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But this may not be the way it is in hilly areas.
Individual turbines at Bougainville are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric energy is improved in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and possibly access roads to each turbine site.
Facts about Bougainville wind farm
- Name: Bougainville
- Wind turbine Supplier: Neg Micon, Model: NM48-750Kw, Units: 29,
- Country: France
- Developer: ENERTRAG
- State: Picardie