Bois de l’Arche wind project was set up in Centre, France It was brought online in 2006 and is owned by ERG Renew.
It is near In Eure-et-Loire department.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or more.
The very best destination for something like Bois de l’Arche would be a steady availability of non-turbulent wind. Additionally, you wouldn’t get a turbine ERG Renew like ERG Renew involved if Bois de l’Arche was not built near local demand or transmission capaIn Eure-et-Loire department.
During the planning stages the Bois de l’Arche wind farm would have been checked and authenticated through wind measurements. However, Bois de l’Arche wind farm would have needed more than simply meteorological data and measurements.
Collection of site-specific data for wind speed and direction might have been essential to determining site potential to be able to finance the project. Local winds are often supervised for a year or more, and detailed wind maps created before wind generators are set up.
Altitude would also have a part to playin a project like Bois de l’Arche. This is due to drag The surge in velocity with altitude is most extraordinary at the surface and is affected by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and is more evident near land and is altered by terrain, surface and obstructions.
Normally, the rise of wind speeds with increasing height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, increases the expected wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out in order that they don’t affect each other. But this isn’t necessarily the way it is in hilly areas.
Individual turbines at Bois de l’Arche are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric current is enhanced in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and probably roads to each and every turbine site.
Facts about Bois de l’Arche wind farm
- Name: Bois de l’Arche
- Wind turbine Supplier: Nordex, Model: N90_2300kW, Units: 4,
- Country: France
- Developer: Nordex
- State: Centre
- City: In Eure-et-Loire department
- Owner: ERG Renew