Bois Bigot wind project was set up in Centre, France It was brought online in 2006 and is owned by ERG Renew.
It is near In Eure-et-Loire department.
See below for data.
As a general rule, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or bigger.
An ideal place for a project like Bois Bigot could have a near constant flow of non-turbulent wind year round, having a minimum chance of abrupt powerful bursts of wind. An important factor of turbine siting is furthermore access to local demand or transmission capaIn Eure-et-Loire department.
During the planning stages the Bois Bigot wind farm would have been checked and authenticated through wind measurements. However, Bois Bigot wind farm might have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction might have been essential to determining site potential as a way to fund the project. Winds around In Eure-et-Loire department are analysed for at least a year or so plus the development of detailed maps. Only then are wind turbines installed.
The wind blows more quickly at higher altitudes because of the reduced effect of drag. The increase in velocity with altitude is most dramatic close to the surface and is affected by landscape, surface roughness, and upwind obstructions such as trees or buildings. Velocity rises with altitude and it is more pronounced near land and is altered by topography, surface and limitations.
Normally, the rise of wind speeds with increasing height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, raises the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out in order that they don’t affect each other. But micrositing increases placement, specially in hilly areas.
Individual turbines at Bois Bigot are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric energy is elevated in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and possibly roads to each and every turbine site.
Facts about Bois Bigot wind farm
- Name: Bois Bigot
- Wind turbine Supplier: Acciona Windpower, Model: AW77-1500, Units: 23,
- Country: France
- Developer: Nordex
- State: Centre
- City: In Eure-et-Loire department
- Owner: ERG Renew