Bel Air wind project was set up in Pays de la Loire, France It was in fact brought online in 2008 and is owned by .
It is near .
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or higher.
The very best location for something similar to Bel Air would be a steady availability of non-turbulent wind. An essential aspect of turbine siting is furthermore admittance to local requirement or transmission capa.
During the planning stages the Bel Air wind farm would’ve been checked and endorsed through wind measurements. Meteorological wind data alone is usually not ample for accurate siting of a large wind power project.
Site information around is a major factor in the development decision Winds around are examined for at least a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
The wind hits quicker at greater altitudes because of the reduced influence of drag. The rise in velocity with altitude is most spectacular at the surface and is affected by geography, surface roughness, and upwind hurdles such as trees or buildings. Velocity grows with altitude and is also more evident near land and is transformed by terrain, surface and hurdles.
Wind speeds growing with altitude is part of a wind energy law. This Pays de la Loires wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, raises the anticipated wind speeds by 10%, and the estimated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But micrositing increases placement, specially in hilly areas.
Individual turbines at Bel Air are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric current is increased in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and perhaps roads to each turbine site.