Beaurevoir wind project was installed in Picardie, France It was completed in 2009 and is owned by EDP Renovaveis.
It is near .
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or more.
A great place for a project like Beaurevoir would have a near constant flow of non-turbulent wind all year long, with a minimum chances of sudden potent bursts of wind. An essential aspect of turbine siting is furthermore admittance to local demand or transmission capa.
During the planning stages the Beaurevoir wind farm would’ve been checked and endorsed through wind measurements. Meteorological wind data alone is usually not sufficient for correct siting of a large wind power project.
Site information around is a major aspect in the ‘development’ final decision Winds around are examined for over a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
The wind blows quicker at greater altitudes as a result of reduced influence of drag. The increase in velocity with altitude is most extraordinary close to the surface and is impacted by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and it is more obvious near land and is altered by topography, surface and obstacles.
Ordinarily, the rise of wind speeds with raising height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, boosts the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect each other. But micrositing maximizes placement, particularly in hilly areas.
Individual turbines at Beaurevoir are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is enhanced in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and possibly roads to each turbine site.
Facts about Beaurevoir wind farm
- Name: Beaurevoir
- Wind turbine Supplier: Vestas Wind Systems, Model: V100/2MW, Units: 6,
- Country: France
- Developer: RDE
- State: Picardie
- Owner: EDP Renovaveis