Avesnes – Beauvoir wind project was installed in Haute-Normandie, France It was created in and is owned by Onshore.
It is near Avesnes-en-Bray & Beauvoir-en-Lyons.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The best destination for something similar to Avesnes – Beauvoir would be a steady supply of non-turbulent wind. Additionally, you would not get a turbine Onshore like Onshore associated if Avesnes – Beauvoir was not built near local demand or transmission capaAvesnes-en-Bray & Beauvoir-en-Lyons.
During the planning stages the Avesnes – Beauvoir wind farm would have been checked and authenticated through wind measurements. Meteorological wind data alone is usually not ample for precise siting of a large wind power project.
Site information around Avesnes-en-Bray & Beauvoir-en-Lyons would have been a major aspect in the development decision Local winds are frequently watched for a year or more, and detailed wind maps made before wind generators are installed.
Altitude would also have a part to performin a project like Avesnes – Beauvoir. This is because of drag The boost in velocity with altitude is most spectacular at the surface and is impacted by landscape, surface roughness, and upwind hurdles such as trees or buildings. Velocity rises with altitude and it is more obvious near land and is transformed by landscape, surface and obstructions.
Typically, the growth of wind speeds with increasing height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, enhances the expected wind speeds by 10%, and the estimated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. However this is not always the situation in hilly areas.
Individual turbines at Avesnes – Beauvoir are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric energy is elevated in voltage using a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and possibly roads to each turbine site.