Airaine wind project was set up in Picardie, France It was in fact brought online in 2013 and is owned by Eole Infrastructure.
It is near .
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
A great position for a project like Airaine might have a near constant flow of non-turbulent wind throughout the year, having a minimum likelihood of sudden effective bursts of wind. An important factor of turbine siting is furthermore access to local requirement or transmission capa.
Before construction, Airaine was probably screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not enough for precise siting of a large wind power project.
Collection of site-specific data for wind speed and direction might have been crucial to determining site potential as a way to fund the project. Local winds are frequently supervised for a year or more, and detailed wind maps made before wind generators are set up.
The wind hits more rapidly at higher altitudes because of the reduced effect of drag. The increase in velocity with altitude is most dramatic close to the surface and is impacted by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and is more pronounced near land and is transformed by terrain, surface and obstructions.
Generally, the growth of wind speeds with escalating elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, increases the predicted wind speeds by 10%, and the anticipated power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But this may not be the way it is in hilly areas.
Individual turbines at Airaine are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric current is increased in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and probably roads to each and every turbine site.
Facts about Airaine wind farm
- Name: Airaine
- Wind turbine Supplier: Senvion, Model: 2 MW, Units: 6,
- Country: France
- Developer: Valorem
- State: Picardie
- Owner: Eole Infrastructure