Batskär wind project was set up in Aland, Finland It was brought online in 2007 and is owned by Allwinds Ab.
It is near Lemland.
See below for data.
As a rule, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or larger.
A great place for a project like Batskär might have a near constant flow of non-turbulent wind throughout the year, with a minimum chances of sudden powerful bursts of wind. Additionally, you wouldn’t get a turbine Allwinds Ab like Allwinds Ab included if Batskär was not built near local demand or transmission capaLemland.
During the planning stages the Batskär wind farm would have been checked and confirmed through wind measurements. Meteorological wind data alone is usually not ample for accurate siting of a large wind power project.
Site data around Lemland would have been a major element in the development choice Local winds are often checked for a year or more, and comprehensive wind maps constructed before wind generators are installed.
Altitude would also have a part to performwithin a project like Batskär. This is because of drag The rise in velocity with altitude is most remarkable at the surface and is impacted by geography, surface roughness, and upwind hurdles such as trees or buildings. Velocity boosts with altitude and is also more evident near land and is transformed by geography, surface and obstructions.
Wind speeds growing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the altitude of a turbine, then, increases the anticipated wind speeds by 10%, and the anticipated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But micrositing increases placement, specifically in hilly areas.
Batskär turbines are connected via medium voltage lines and communications.
At a substation, this medium-voltage electric energy is increased in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and possibly roads to each turbine site.
Facts about Batskär wind farm
- Name: Batskär
- Wind turbine Supplier: Suzlon Energy, Model: 1.5MW, Units: 4,
- Country: Finland
- Developer: Enercon
- State: Aland
- City: Lemland
- Owner: Allwinds Ab