Aburi wind farm is located in Lääne-Viru, Estonia. It was finished in 2014 and is owned by .
It is near Aburi.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
An ideal location for a project like Aburi would have a near constant flow of non-turbulent wind throughout the year, with a minimum likelihood of abrupt potent bursts of wind. An essential aspect of turbine siting is moreover access to local requirement or transmission capaAburi.
Before construction, Aburi was probably screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not adequate for correct siting of a large wind power project.
Assortment of site-specific data for wind speed and direction might have been vital to determining site potential as a way to fund the project. Winds around Aburi are analysed for over a year or so plus the creation of detailed maps. Only then are wind turbines installed.
The wind blows more quickly at higher altitudes as a result of reduced influence of drag. The surge in velocity with altitude is most spectacular at the surface and is affected by landscape, surface roughness, and upwind hurdles such as trees or buildings. Velocity increases with altitude and it is more evident near land and is altered by topography, surface and limitations.
Typically, the growth of wind speeds with escalating height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, enhances the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect one another. But micrositing maximizes placement, particularly in hilly areas.
Aburi turbines are linked via medium voltage lines and communications.
At a substation, this medium-voltage electric energy is enhanced in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to every turbine site.
Facts about Aburi wind farm
- Name: Aburi
- Wind turbine Supplier: Vestas Wind Systems, Model: , Units: 1,
- Country: Estonia
- Developer: OÜ Green Electric
- State: Lääne-Viru
- City: Aburi