Villköl wind project was set up in Loja, Ecuador It was completed in 2013 and is owned by .
It is near Cerro Villonaco.
See below for data.
In most cases, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or greater.
The very best location for something like Villköl would be a steady availability of non-turbulent wind. An important factor of turbine siting is furthermore admittance to local demand or transmission capaCerro Villonaco.
During the planning stages the Villköl wind farm would’ve been checked and validated through wind measurements. However, Villköl wind farm might have needed more than just meteorological data and measurements.
Site data around Cerro Villonaco is a major element in the development final decision Local winds are often watched for a year or more, and comprehensive wind maps created before wind generators are set up.
Altitude would also possess a part to playwithin a project like Villköl. This is due to drag The surge in velocity with altitude is most extraordinary at the surface and is impacted by landscape, surface roughness, and upwind hurdles such as trees or buildings. Velocity boosts with altitude and is also more distinct near land and is altered by terrain, surface and obstacles.
Wind speeds growing with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, boosts the expected wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect one another. But this is not always the case in hilly areas.
Villköl turbines are connected via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric current is elevated in voltage using a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and possibly access roads to each turbine site.
Facts about Villköl wind farm
- Name: Villköl
- Wind turbine Supplier: Leitwind, Model: LTW77 1.5MW, Units: 2,
- Country: Ecuador
- Developer: Carvisa Energia, Emasesa, Equinse
- State: Loja
- City: Cerro Villonaco