Gettrup wind project was installed in North Denmark, Denmark It was brought online in 2000 and is owned by .
It is near Gettrup.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
A perfect position for a project like Gettrup would have a near constant flow of non-turbulent wind year round, having a minimum chances of abrupt potent bursts of wind. Additionally, you would not get a turbine like included if Gettrup was not built near local demand or transmission capaGettrup.
During the planning stages the Gettrup wind farm would’ve been checked and validated through wind measurements. Meteorological wind data alone is usually not adequate for correct siting of a large wind power project.
Site info around Gettrup would have been a major element in the development final decision Winds around Gettrup are analysed for over a year or so alongside the development of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to performin a project like Gettrup. This is because of drag The surge in velocity with altitude is most remarkable at the surface and is affected by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and is also more distinct near land and is changed by landscape, surface and obstacles.
Commonly, the rise of wind speeds with escalating height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, enhances the anticipated wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out to make sure they don’t affect each other. But micrositing optimizes placement, specifically in hilly areas.
Gettrup turbines are linked via medium voltage lines and communications.
At a substation, that medium-voltage electric current is improved in voltage using a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and perhaps roads to each turbine site.
Facts about Gettrup wind farm
- Name: Gettrup
- Wind turbine Supplier: Neg Micon, Model: NM48/750, Units: 2,
- Country: Denmark
- Developer: Neg Micon
- State: North Denmark
- City: Gettrup