Ejerslev wind farm is situated in Central Denmark, Denmark. It was created in 2002 and is owned by .
It is near Ejerslev.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or more.
The very best destination for something similar to Ejerslev would be a steady availability of non-turbulent wind. An important factor of turbine siting is moreover admission to local requirement or transmission capaEjerslev.
Before development, Ejerslev was probably screened on the foundation of a wind atlas, and validated with wind specifications. However, Ejerslev wind farm would have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction could have been vital to determining site potential as a way to finance the project. Local winds are often examined for a year or more, and detailed wind maps constructed before wind generators are set up.
The wind blows more rapidly at higher altitudes because of the reduced influence of drag. The boost in velocity with altitude is most extraordinary near the surface and is impacted by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity boosts with altitude and is more distinct near land and is altered by geography, surface and obstacles.
Wind speeds escalating with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Doubling the height of a turbine, then, increases the anticipated wind speeds by 10%, and the anticipated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But this is not always the way it is in hilly areas.
Individual turbines at Ejerslev are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric energy is enhanced in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and possibly access roads to every turbine site.
Facts about Ejerslev wind farm
- Name: Ejerslev
- Wind turbine Supplier: Enercon, Model: E-82 E2/2,
- Country: Denmark
- Developer: Vestas Wind Systems
- State: Central Denmark
- City: Ejerslev