Borre wind project was installed in Southern Denmark, Denmark It was created in 2001 and is owned by .
It is near Borre.
See below for data.
For the most part, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or larger.
The best place for a project like Borre might have a near constant flow of non-turbulent wind all year long, with a minimum likelihood of abrupt effective bursts of wind. An essential aspect of turbine siting is furthermore access to local demand or transmission capaBorre.
Before development, Borre was probably screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not ample for precise siting of a large wind power project.
Assortment of site-specific data for wind speed and direction would have been crucial to determining site potential as a way to finance the project. Winds around Borre are analysed for at least a year or so alongside the development of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to performin a project like Borre. This is due to drag The increase in velocity with altitude is most remarkable close to the surface and is affected by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity grows with altitude and is also more distinct near land and is changed by geography, surface and hurdles.
Commonly, the increase of wind speeds with growing height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, raises the predicted wind speeds by 10%, and the expected power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But micrositing increases placement, specifically in hilly areas.
Individual turbines at Borre are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is elevated in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Borre wind farm
- Name: Borre
- Wind turbine Supplier: Furhlander, Model: FL MD/77, Units: 2,
- Country: Denmark
- Developer: Vattenfall
- State: Southern Denmark
- City: Borre