Allerslev wind project was set up in Southern Denmark, Denmark It was in fact brought online in 1988 and is owned by .
It is near .
See below for data.
Typically, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or more.
A great location for a project like Allerslev might have a near constant flow of non-turbulent wind all year long, having a minimum chance of sudden powerful bursts of wind. Additionally, you wouldn’t get a turbine like associated if Allerslev was not built near local demand or transmission capa.
During the planning stages the Allerslev wind farm would have been checked and confirmed through wind measurements. However, Allerslev wind farm might have needed more than merely meteorological data and measurements.
Site information around is a major aspect in the ‘development’ choice Winds around are evaluated for at least a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to performwithin a project like Allerslev. This is because of drag The surge in velocity with altitude is most remarkable at the surface and is affected by landscape, surface roughness, and upwind hurdles such as trees or buildings. Velocity grows with altitude and is also more evident near land and is transformed by geography, surface and obstructions.
Wind speeds increasing with altitude is part of a wind energy law. This Southern Denmarks wind speed rises with the 7th root of altitude. Doubling the height of a turbine, then, boosts the predicted wind speeds by 10%, and the predicted power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But this may not be the situation in hilly areas.
Individual turbines at Allerslev are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric current is elevated in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and possibly access roads to each turbine site.
Facts about Allerslev wind farm
- Name: Allerslev
- Wind turbine Supplier: Bonus, Model: B23/150, Units: 1,
- Country: Denmark
- State: Southern Denmark