Agernæs wind project was installed in Southern Denmark, Denmark It was in fact brought online in 1997 and is owned by .
It is near .
See below for data.
Generally speaking, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or greater.
A great position for a project like Agernæs could have a near constant flow of non-turbulent wind throughout the year, with a minimum probability of abrupt effective bursts of wind. Additionally, you wouldn’t get a turbine like associated if Agernæs was not built near local demand or transmission capa.
During the planning stages the Agernæs wind farm would’ve been checked and endorsed through wind measurements. Meteorological wind data alone is usually not sufficient for correct siting of a large wind power project.
Site info around would have been a major aspect in the development decision Local winds are frequently watched for a year or more, and detailed wind maps built before wind generators are installed.
The wind hits swifter at greater altitudes because of the reduced influence of drag. The rise in velocity with altitude is most dramatic close to the surface and is affected by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity boosts with altitude and it is more obvious near land and is altered by terrain, surface and hurdles.
Almost always, the growth of wind speeds with escalating height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, raises the anticipated wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they really don’t affect one another. But micrositing optimizes placement, particularly in hilly areas.
Individual turbines at Agernæs are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric energy is elevated in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and possibly access roads to every turbine site.
Facts about Agernæs wind farm
- Name: Agernæs
- Wind turbine Supplier: Vestas Wind Systems, Model: V44/600 , Units: 1,
- Country: Denmark
- State: Southern Denmark